- 相关推荐
Influences of Hole Shape on Film Cooling Characteristics with CO2 Injection
This article presents the data about heat transfer coefficient ratios, film cooling effectiveness and heat loads for the injection through cylindrical holes, 3-in-1 holes and fanned holes in order to characterize the film cooling performance downstream of a row of holes with 45° inclination and 3 hole spacing apart. The trip wire is placed upstream at a distance of 10 times diameter of the cooling hole from the hole center to keep mainstream fully turbulent. Both inlet and outlet of 3-in-1 holes have a 15° lateral expansion. The outlet of faaned holes has a lateral expansion. CO2 is applied for secondary injection to obtain a density ratio of 1.5. Momentum flux ratio varies from 1 to 4. The results indicate that the increased momentum flux ratio significantly inoreases heat transfer coefficient and slightly improve film cooling effectiveness for the injection through cylindrical holes. A weak dependence of heat transfer coefficient and film cooling effectiveness, respectively, on momentum flux ratio has been identified for the injection through 3-in-1 holes. The increase of the momentum flux ratio decreases heat transfer coefficient and significantly increases film cooling effectiveness for the injection through fanned holes. In terms of the film cooling performance, the fanned holes are the best while the cylindrical holes are the worst among the three hole shapes under study.
作 者： Li Guangchao Zhu Huiren Fan Huiming 作者单位： Department of Aeroengines,Northwestern Polytechnical University,Xi'an 710072,China 刊 名： 中国航空学报(英文版) ISTIC 英文刊名： CHINESE JOURNAL OF AERONAUTICS 年，卷(期)： 2008 21(5) 分类号： V2 关键词： aerospace propulsion system gas turbine film cooling effectiveness heat transfer coefficient【Influences of Hole Shape on Film Coo】相关文章：
Hole up：藏匿05-04
第160讲：shape up or ship out; rock the boat05-04
Method of Spectrophotometric Microanalysis Based on HRP/PET Self-assembly Film04-25
INVESTIGATION OF WO3-DOPED TiO2 FILM COMPOSITE PHOTOCATALYST04-26